PORSCHE 911 HIGH TORQUE
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.
Ipd intake plenum Porsche 997 s 3.8l 05+
The ipd plenums are a unique design that dramatically increases horsepower and torque by optimizing air flow efficiency. Air flow is managed through a diversion splitter that maximizes air speed into the engine. The charged intake air maintains a higher velocity by replacing the factory plastic "t" intake with a stronger and more efficient cast aluminum "y" design. This unique "y" style plenum optimizes flow, improving acceleration and boost response. The new ipd replacement plenum eliminates the turbulent air flow by smoothly splitting and diverting the air flow and directing it towards the cylinders at a much higher air speed. This simple bolt-on plenum upg...(choose a part on the right to read more)
General Fitment 911 2005-08
$1,208.25
Make a selection
Supersprint high flow cat pipes Porsche 996 c2/c4 99-04
Supersprint high flow cat pipes are available for you 99-04 Porsche 996 Carrera 2 or 4. the high flow cat pipes are designed to reduce flow compared to the factory ones while still staying environmentally safe. the cat pipes reduce restriction increase horsepower and torque. the factory o2 sensors are retained and no check engine lights are incurred. sold as a pair and fit with mufflers and headers, both factory or aftermarket.
*contact us for special pricing.*
General Fitment 911 1998-05
$4,224.80
Make a selection
More air = more power! Ipd plenum's patented, cast aluminum "y" style plenum increases horsepower and torque by optimizing airflow into the intake manifold. The factory plastic "t" style intake creates airflow turbulence, which deprives the motor of air, robbing hp and torque. Ipds "y" style plenum smoothly channels the airflow towards the left and right cylinder banks. The engine receives a larger mass of air at a higher velocity, which equates to increases in hp and torque across the entire rev range. The end result is improved acceleration and increased boost response (on turbo vehicles). Ipd plenum's provide dyno proven results and are a simple and cost effective way to increase power. Want more pow...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
From $1,045.00
Make a selection
Supersprint exhaust mufflers Porsche 996 turbo 00-05
Supersprint inc. Was formed in 1955 with the objective of designing and building the highest quality exhaust systems in the world. That objective has been the driving force behind each supersprint product from the first system built to those being develop.
The supersprint exhaust for the Porsche 996 turbo gives the car a much deeper tone. increase both horsepower and torque. supersprint is one of the elite and high quality exhausts made in europe. the exhaust fits with the factory headeres and tips. sold as a pair. see item title.
*contact us for special pricing.*
General Fitment 911 1998-05
$2,876.01
Make a selection
Sport rear silencer sets for - Porsche 993 Carrera 3.6l; Porsche 993 Carrera rs 3.8l; Porsche 993 cup.
. These sport rear silencers have been developed and tested to the highest standard on the dyno. They are designed as absorptive silencers which reduce exhaust back pressure drastically. The result is beside more power and torque a better response characteristic.
Further evidence of improvements made, are recognised through an enhanced accoustic and weight reduction.
Strenghtened brakets as well as the olive- and slide system ensure an exact adjustment, which guarantees a stressless installation.
New modular design with the possibility of interchanging components. Developed for maximum ...(choose a part on the right to read more)
General Fitment 911 1994-98
Constructed with 100% polyurethane on all four sides, this high flow, oiled oe replacement performance filter will out flow stock paper filter for improved horsepower and torque. Five layers of progressively finer mesh cotton gauze media provide maximum airflow for best performance results. Washable and reusable for multiple cleaning cycles, the tall open evenly space pleats provide excellent dust holding capacity for longer service cycle between cleanings. Integrated urethane bump seal insures tight, no leak seal over the life of the filter.
Features:
Constructed with 100% polyurethane
General Fitment 911 1998-05 911 TURBO/GT2 2001-05
Ipd intake plenum non e-gas Porsche 996 3.4l 98-99
The ipd plenums are a unique design that dramatically increases horsepower and torque by optimizing air flow efficiency. Air flow is managed through a diversion splitter that maximizes air speed into the engine. The charged intake air maintains a higher velocity by replacing the factory plastic "t" intake with a stronger and more efficient cast aluminum "y" design. This unique "y" style plenum optimizes flow, improving acceleration and boost response. The new ipd replacement plenum eliminates the turbulent air flow by smoothly splitting and diverting the air flow and directing it towards the cylinders at a much higher air speed. This simple bolt-on ...(choose a part on the right to read more)
General Fitment 911 1998-05
$1,208.25
Make a selection
Ipd intake plenum Porsche 996 3.6l 02-04
The ipd plenums are a unique design that dramatically increases horsepower and torque by optimizing air flow efficiency. Air flow is managed through a diversion splitter that maximizes air speed into the engine. The charged intake air maintains a higher velocity by replacing the factory plastic "t" intake with a stronger and more efficient cast aluminum "y" design. This unique "y" style plenum optimizes flow, improving acceleration and boost response. The new ipd replacement plenum eliminates the turbulent air flow by smoothly splitting and diverting the air flow and directing it towards the cylinders at a much higher air speed. This simple bolt-on plenum upg...(choose a part on the right to read more)
General Fitment 911 1998-05
$1,208.25
Make a selection
Ipd intake plenum Porsche 997 3.6l 05+
The ipd plenums are a unique design that dramatically increases horsepower and torque by optimizing air flow efficiency. Air flow is managed through a diversion splitter that maximizes air speed into the engine. The charged intake air maintains a higher velocity by replacing the factory plastic "t" intake with a stronger and more efficient cast aluminum "y" design. This unique "y" style plenum optimizes flow, improving acceleration and boost response. The new ipd replacement plenum eliminates the turbulent air flow by smoothly splitting and diverting the air flow and directing it towards the cylinders at a much higher air speed. This simple bolt-on plenum upgra...(choose a part on the right to read more)
General Fitment 911 2005-08
$1,208.25
Make a selection
Speed technologies over the years have become the leader in providing the daily 700hp plus driven Porsche 996tt with the proper exhaust and accessories. With 20 years of experiences, the result is a line of superior performing exhausts for a variety of Porsche automobiles.
Speedtech has engineered to have a rich, deep tone in the lower rpms and a pronounced flat six note at higher rpms. With this new designed speedtech adds substantial horsepower and torque gains, along with improved throttle response are achieved with the free flowing, unrestrictive 70mm design. The 70mm tubing is utilized throughout, including the outlet pipes, which reduces back pressure and enables quick turbo response. The speedtech ...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$3,233.25
Make a selection
Speed technologies over the years have become the leader in providing the daily 700hp plus driven Porsche 996tt with the proper exhaust and accessories. With 20 years of experiences, the result is a line of superior performing exhausts for a variety of Porsche automobiles.
Speedtech has just released a their new sytem of exhaust design with x-cellerator cross-flow exhaust system. The cross flow designed to offer the discerning Porsche enthusiast the ultimate exhaust system with a number of performance and sound options in one complete package. The cross-flow designed by combining the exhaust pulses from both sides of the Porsche boxer motor with an "x" of "cross-flow" at the center of the muffler. Als...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
Speed technologies over the years have become the leader in providing the daily 700hp plus driven Porsche 996tt with the proper exhaust and accessories. With 20 years of experiences, the result is a line of superior performing exhausts for a variety of Porsche automobiles.
Speedtech has just released a their new sytem of exhaust design with x-cellerator cross-flow exhaust system. The cross flow designed to offer the discerning Porsche enthusiast the ultimate exhaust system with a number of performance and sound options in one complete package. The cross-flow designed by combining the exhaust pulses from both sides of the Porsche boxer motor with an "x" of "cross-flow" at the center of the muffler. Als...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
100 cell German hjs sport catalysts with x torque design made by m&m in Germany.
The "x torque" design in is a true x pipe design. It is open in the center to add backpressure for torque. In combination with the free flowing 100 cell cats the "x torque" design give's you 10-15 ft-lbs of torque in the mid range along with 10-15 hp in the higher rpms. Why settle for the traditional cross over cat design when you can add torque in the mid range where the 996's need it most!
FVD is proud to introduce our newest line of Brombacherexhaust systems. Brombacher exhausts are engineered for the discerning Porsche owner and offer unmatched performance, unparalleled quality, and incredible value. All of our ex...(choose a part on the right to read more)
General Fitment 911 1998-05
From $1,686.46
Make a selection
Having the perfect sounding exhaust system that helps gain power is not the easiest task at hand. turbocharged cars do not need any backpressure and ideally perform best with no restriction off of the turbo exhaust outlet. however, this would cause your car to be incredibly loud and not comfortable for daily use. agency power has developed this exhaust system to give Porsche 997 turbo owners a race tone exhaust without the dreaded drone in the 2200-2800 rpm range. the muffler system is designed to keep noise level down inside the cabin but roar at full throttle. the exhaust features high flow 200 cell catalytic converters. the cats work with the factory o2 primary and secondary sensors to not throw a che...(choose a part on the right to read more)
General Fitment 911 2005-08
$2,999.95
Make a selection
Ever noticed a glow coming from underneath your Porsche? if so, you probably have a restricted catalytic converter. our test pipes are of the highest quality and will test for this problem with a perfect fit. Catalytic test pipes can reduce engine temperature by as much as 50 degrees and give a substantial power and torque increase. Feel the power on the first high speed racing track pass.
General Fitment 911 1978-83
FVD "brombacher" sound version exhaust system for 964 89-94
- + 25 crank hp & + 19 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 66 lbs. (29,9 kg)
- t 316 stainless steel for improved durability over t 304
- 1 x 3.5"(90mm) oval tip
- includes flexible heating tube
- made in Germany
- no dme programming necessary. No check engine light.
- intoxicating growl at idle, partial throttle and wide open throttle.
FVD is proud to introduce our newest line of Brombacherexhaust systems. Brombacher exhausts are engineered for the discerning Porsche owner and offer unmatched performance, unparalleled qualit...(choose a part on the right to read more)
General Fitment 911 1989-94
$8,518.40
Make a selection
"brombacher" 996 GT2 (lightweight version) stainless steel exhaust system
Facts:
- + 25 crank hp & + 19 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 51 lbs. (23,0 kg)
- t 316 stainless steel for improved durability over t 304
- 4 x 3.5"(90mm/80mm) round tips
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- no dme programming necessary.
Figures:
Genuine:
Engine - 6 cylinder boxer twin-turbo (based on 6 speed)
Capacity - 3600ccm
Compression ratio - 9,0:1
Max. Power -...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$4,230.60
Make a selection
100 cell catalytic “x torque” design made by m&m in Germany.
The "x torque" design in is a true x pipe design. It is open in the center to add backpressure for torque. Give's you 10-15 ft-lbs of torque in the mid range along with 10-15 hp in the higher rpms. Why settle for the traditional cross over cat design when you can add torque in the mid range where the 996's need it most!
Dme programming is necessary !
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
General Fitment 911 GT3 2003-05 911 1998-05
$2,818.20
Make a selection
Facts:
- + 25 crank hp & + 19 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 51 lbs. (23,0 kg)
- t 316 stainless steel for improved durability over t 304
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- no dme programming necessary.
Please note:
Exhaust tips are not included! Stock tips will fit.
The tips pictured above can be purchased seperately. They are "quad" 3.5"(90mm/80mm) tips and are made for this muffler. Kindly order bes 996 060 41s separately.
Figures:
Gen...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$4,947.80
Make a selection
"brombacher" 996 GT2 titanium exhaust system with 200 cells titanium tri-metal catalytics.
Facts:
- + 25 crank hp & + 19 crank torque
- 100-105 db sound level
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 26 lbs. (11,9 kg)
- 2 x 3.5"(90mm) titanium tips
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- no dme programming necessary.
Figures:
Genuine:
Engine - 6 cylinder boxer twin-turbo (based on 6 speed)
Capacity - 3600ccm
Compression ratio - 9,0:1
Max. Power - 353kw (480hp) @ 60...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$9,835.10
Make a selection
Brombacher race exhaust system with valves for 997 GT3/rs with rsr style tips
Facts:
- + 25 crank hp & + 18 crank torque with valves closed
- 200 cell high flow, tri metal German hjs "hd" sport catalysts**
- 2 3/4" tubing (70 mm) straight through design for max. Power
- equal length header set up with merge collector for maximum torque gain
- weighs 37.2 lbs. (16.9 kg) this is the lightest valved system in the Brombacherline !**
- 49.3 lb (22.3 kg) savings over stock system!**
- t 316 stainless steel for improved durability over t 304
- includes all necessary clamps and mounting brackets
- made in Germany
- 110 db with valves open (not for faint of heart!)
- 103 db with valves closed
- into...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$6,106.10
Make a selection
Not for cars with OEM muffler. Only for plain tube (catalytic to center muffler) or bes 997… muffler. These headers and cats are perfect for those who want to run sport cats without a software program. Our latest development for the GT3 is aimed at those who are looking for more torque in the mid range, a rich, deep exhaust growl and most importantly no check engine light with stock software. These headers contain the latest hjs cats, they are nicknamed "hd" for high durability matrix design catalytic converters. They have a sm-matrix (winding of three flat and corrugated foils) and a special connection to the matrix sheath, which equates to extremely high durability for track and street use. The added ...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
From $4,183.87
Make a selection
Brombacher race exhaust system with valves for 997 GT3/rs with 2 x 90mm tips
Facts:
- + 25 crank hp & + 18 crank torque with valves closed
- 200 cell high flow, tri metal German hjs ?hd? Sport catalysts**
- 2 3/4" tubing (70 mm) straight through design for max. Power
- equal length header set up with merge collector for maximum torque gain
- weighs 37.2 lbs. (16.9 kg) this is the lightest valved system in the Brombacherline !**
- 49.3 lb (22.3 kg) saving?s over stock system!**
- t 316 stainless steel for improved durability over t 304
- includes all necessary clamps and mounting brackets
- made in Germany
- 110 db with valves open (not for faint of heart!)
- 103 db with valves closed
- intox...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$6,702.68
Make a selection
Facts:
- + 25 crank hp & + 19 crank torque
- 100-105 db sound level
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 26 lbs. (11,9 kg)
- 2 x 3.5"(90mm) titanium tips
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- no dme programming necessary.
Figures:
Genuine:
Engine - 6 cylinder boxer twin-turbo (based on 6 speed)
Capacity - 3600ccm
Compression ratio - 9,0:1
Max. Power - 353kw (480hp) @ 6000rpm
Max. Torque - 620nm (457lbf ft) @ 1950-5000rpm
Max. Speed - 310km/h (193mph)
Max. Rpm -...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$9,909.90
Make a selection
"brombacher" racing exhaust system for 997gt3/rs
Facts:
- + 25 crank hp & + 25 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70 mm) straight through design for max. Power
- equal length header set up with merge collector for maximum torque gain
- weights 6 kg
- 33 kg savings over stock system!
- t 316 stainless steel for improved durability over t 304
- reuse?s factory center muffler for backpressure and resonance dampening.
- includes all necessary clamps and mounting brakets
- made in Germany
- 108 db
- intoxicating growl at idle, partial throttle and wide open throttle
- reuse?s factory tips or larger aftermarket tips
- no dme programming neces...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$11,661.10
Make a selection
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|